Fujitsu FPCCC47 Carrying Case User Manual


 
5
System with the main battery installed:
Slide the system all the way into the bump case until it meets
the opposite end of the case (see Figure 3).
Pull the battery strap down tightly and tuck it under the
battery so that it is snug against the side of the battery. (See
Figure 4). Insert the foam bumper into the case, with the
Velcro side facing out to the right. Reattach the flap to the
side of the case.
Note that either the strap or bumper can be used separately
to secure the system, but for optimal security, both should
be used.
Figure 4. Securing Main Battery in Bump Case
Side flap
Tablet with
Extra
space
Battery Strap
6-cell battery
Bumper
FPC58-1044-01 Bump Case.fm Page 5 Monday, December 8, 2003 1:28 PM