Filter
Top Products
Chapter 4 105
CDMA Measurements - Screens and Control Fields
Ofs Trnsfer Output Port
Ofs Trnsfer
This field transfers the time offset value from the time offset
measurement (displayed in TmOfs) to the Time Offset field
automatically. Before selecting Ofs Trnsfer, you must make at least
one of the following code domain measurements:
• Power
• Timing
•Phase
Operating Considerations
When using this command programmatically, be sure a value for Tm
Ofs has been obtained from a power, timing, or phase measurement.
(One method of ensuring the measurement has been completed would
be to send an HP-IB command to query the results of the Tm Ofs field
before sending the transfer command).
Screens on which this field is present
COD DOM (Code Domain Analyzer): fast power setup controls menu
Output Port
This field selects the output port for the signal from the Test Set’s RF
and CDMA generators.
RF Out
selects the RF IN/OUT connector.
Dupl
selects the DUPLEX OUT connector.
Screens on which this field is present
CDMA GENERATOR
Main Menu