HP (Hewlett-Packard) E6380-90019 Cell Phone Accessories User Manual


 
Chapter 5 125
Analog Measurements - Screens and Control Fields
AFGen2 Freq AFGen2 To
AFGen2 Freq
This field sets the frequency for the second audio frequency sinewave
generator.
Screens on which this field is displayed
RF GENERATOR
AFGen2 To
This field has two subfields:
The upper field sets the destination port for audio frequency
generator 2
FM -RF generator FM modulator
AM -RF generator AM modulator
Audio Out -AUDIO OUT connector
The lower field
sets FM modulation deviation if the upper field set to FM
sets AM modulation depth if the upper field set to AM
sets the amplitude of audio signal (volts RMS) at the AUDIO
OUT connector if upper field is set to Audio Out
turns off the AF generator if the
Yes On/Off key is pressed.
Operating Considerations
Simultaneous FM and AM, using both AF generators is not allowed.
AF generators 1 and 2 are automatically turned off any time the CDMA
screens are displayed. This prevents accidental amplitude or frequency
modulation of the CDMA carrier. The AF generators are turned back on
when you exit the CDMA screens (if they were previously turned on).
Screens on which this field is displayed
RF GENERATOR
Main Menu