Filter
Top Products
Chapter 6 179
Configuration - Screens and Control Fields
Save/Recall Save/Recall
Save/Recall
This field specifies which memory device the Test Set accesses when the
save and recall functions are used.
• Internal is a section of internal RAM. RAM is also used for
running IBASIC programs, which may require you to delete the
save/recall registers if the program is very large.
• Card is the front-panel MEMORY CARD (PC card) slot. A
Save/Recall Device is not Present message is displayed if
you try to save or recall an instrument setup when a write-able PC
card is not installed in the Test Set.
• RAM refers to RAM disks that you can create on internal RAM. Refer
to the Programmer’s Guide for information on creating RAM Disks.
This is part of the same memory used when “internal” is specified,
and may have to be erased when loading very large IBASIC
programs. A Save/Recall Device is not initialized
message is displayed if you try to save or recall an instrument setup
when a RAM disk has not been created.
Screen(s) Where Field is Present
I/O CONFIGURE
Main Menu