Filter
Top Products
21
Conventions Used in this Book
Screen names are shown as follows: CODE DOM.
Keys are shown in the following typeface:
CDMA Gen. Shifted functions
(labeled in blue above the keys) are accessed by pressing and releasing
the blue Shift key, and then the key below the blue label.
Fields and messages displayed on the CRT are shown in the following
typeface: Input Atten.
The term “Test Set” is used to refer to the HP 8935.
The screens shown in this manual may not exactly match the screens
displayed on the Test Set’s CRT. Some differences may be due to control
field settings, while other differences may be due to instrument
revisions.
Which Document is
Required?
The following documents are part of the HP 8935 document set. Use the
table to help you decide which document you need.
Table 2 Document Navigation
Document Part Number Usage
CDMA Application Guide E6380-90016 Use this manual for basic CDMA measurements and
for getting started with the Test Set.
AMPS Application Guide E6380-90017 Use this manual for making AMPS base station
measurements.
Reference Guide E6380-90019 Use this manual for screen and field descriptions and
general operation information about the Test Set.
Programmer’s Guide E6380-90018 Use this manual to learn HP-IB syntax and for learning
how to program the Test Set.
Assembly Level Repair
Guide
E6380-90015 Use this manual to perform calibration on the Test Set
and for general service information.
Main Menu