HP (Hewlett-Packard) E6380-90019 Cell Phone Accessories User Manual


 
Chapter 2 39
Operating Overview
Displaying Analog Measurements
Displaying Analog Measurement Results on a Meter Scale
Figure 2-6 Displaying the Meter Scale
Measurement results can be displayed on a meter scale. The digital
numeric value is still displayed (but smaller) under the meter scale.
To display the meter scale
Step 1. Move the cursor to the unit-of-measure field for the
measurement you want displayed on the meter.
Step 2. Press and release the blue Shift key, then the Incr Set key to
access the meter function.
Step 3. Select On/Off from the Meters: menu (or press the
On/Off key).
To set the meter’s end points and scale intervals
Step 1. Use the knob to select the unit-of-measure field for the
measurement you want displayed on the meter.
Step 2. Press and release the blue
Shift key, then the Incr Set key to
access the meter function.
Step 3. Select Hi End, Lo End, or Interval from the Meters: menu
and enter the value for your selection, then press the
Enter key.
Step 4. Repeat steps 2 and 3 until you have set the desired
parameters for the meter’s scale.
Unit-of -Measure
Fields
Meters:
On/Off
Lo End
Hi End
Intervals
Main Menu