Filter
Top Products
Chapter 2 47
Operating Overview
Setting an RF Generator/Analyzer Offset
Setting an RF Generator/Analyzer Offset
You can set a fixed frequency offset between the RF generator and the
RF analyzer. This feature is convenient for testing radios with a fixed
transmit/receive frequency offset.
To set an RF Offset
Step 1. Go to the INSTRUMENT CONFIGURE screen.
Step 2. Set the RF Display field to Freq
.
Step 3. Set the RF Offset field to On.
Step 4. Select the (Gen)-(Anl) field and enter the frequency offset
value.
Step 5. Go to the RF GENERATOR screen.
Step 6. Select the RF Gen Freq field, and rotate the cursor control
knob to vary the RF generator’s frequency.
Step 7. Go to the RF ANALYZER screen. Notice that the Tune Freq
value changes to maintain the offset between the generator
and the analyzer. (You can use the
Prev key to switch between
the generator and analyzer screens.)
Main Menu