Filter
Top Products
66 Chapter 3
Overview of the Test Set’s Built-In Tools
Using RF Tools Program
Catalog PC (Memory) Card
This utility lists all the files contained on the PC card. The PC card that
you want to catalog must be inserted prior to selecting this test.
• LIF file types are denoted by the following prefixes and suffixes:
• c prefix denotes a program code file
• l prefix denotes a library file
• p prefix denotes a procedure file
• _d suffix denotes a data file
• _p suffix denotes a plot file
• DOS file types are denoted by the following suffixes:
• .PGM suffix denotes a program code file
• .LIB suffix denotes a library file
• .PRC suffix denotes a procedure file
• .DAT suffix denotes a data file
• .PLT suffix denotes a plot file
Set Up Printer/Data Collection
This utility allows you to collect measurement data using a printer or a
PCMCIA card. The following table shows the parameters that can be
set using this utility. These parameters can also be found on the
PRINTER CONFIGURE screen and the I/O CONFIGURE screen.
Table 3-3 Parameters for Set Up Printer and Data Collection
• Data Collection
•Off
• Serial 9
• Serial Baud
• Parity
• Data Length
• Stop Length
• Flow Control
• None
• Xon/Xoff
• Hardware
• PCMCIA
• Printer
• Off
•Serial 9
• Serial Baud
• Parity
• Data Length
• Stop Length
• Flow Control
• None
• Xon/Xoff
• Hardware
• Parallel 15
• HPIB 701
• Printer
Configuration
• Lines/Page
• Form feed at
start of page
• Form feed at
end of page
• HPIB Address
• Output
Heading 1
• Output
Heading 2
Main Menu