Filter
Top Products
Chapter 3 73
Overview of the Test Set’s Built-In Tools
Using the Oscilloscope (Scope)
Triggering the Oscilloscope
You can control following triggering features of the oscilloscope:
• Trigger external or internal
• Automated or normal triggering
• Continuous or single shot triggering
• Trigger level
• Trigger delay
The oscilloscope is triggered using the Trigger menu. Select this menu
with the following procedure:
Step 1. Press
Shift, then Spec Anl (Scope) to go to the SCOPE screen.
Step 2. Select the Controls field, then choose Trigger from the list
of choices.
Using the Oscilloscope’s Marker
The marker is used to help you make measurements with the
oscilloscope. By repositioning the marker, you can measure the level
and time.
The marker is controlled using the marker menu. Select this menu with
the following procedure:
Step 1. Press
Shift, then Spec Anl (Scope)to go to the SCOPE screen.
Step 2. Select the Controls field, the choose Marker from the list of
choices.
Main Menu