Filter
Top Products
98 Chapter 4
CDMA Measurements - Screens and Control Fields
CW RF Path Data Rate
CW RF Path
This field selects the path for the RF generator’s signal.
• Bypass disables the IQ modulator. This mode is used when
generating standard AM, FM, or CW signals in the Test Set.
• IQ
enables the IQ modulator.
See the "Data Source" field on page 99 for more information.
Screens on which this field is present
CDMA GENERATOR
Data Rate
This field allows receiver testing at data rates of 9.6 or 14.4 Kbps.
If the data buffer is the selected data source, and the data rate is
changed, the transmission state will change to Idle. Select Send to
resume data output at the new rate.
Choices
• 14.4 Kbps
• 9.6 Kbps
Default selection: 9.6 Kbps
Screens on which this field is present
CDMA GENERATOR
Main Menu