Open as PDF
IIKKEELLIITTEE VVIIDDEEOO CCAASSEE
SSUUPPPPLLEEMMEENNTTAALL IINNSSTTRRUUCCTTIIOONNSS FFOORR
##66004477 CCaannoonn ZZRR990000,, 993300,, 995500
MMDD220000,, 220055,, 221155,, 221166,, 223355,, 225555
This supplemental set of instructions describes additional features specific to your
housing model. Prior to testing the system in the water, please read this supplement along
with the general instruction manual to become familiar with its features and functions.
Ikelite Video Cases are slightly negative in salt water for stability. This housing has
been water pressure tested at the factory and has a working depth of 60m 200.
• Power On/Off
• Power Zoom
• P, Easy
• Joy Stick #1 - Focus,
White Balance, Image Effect,
Program AE & Digital Effect.
• Joy Stick #2
• Lens Switch
MMAAIINN OO--RRIINNGG ##00110099
O-rings last several years if properly
maintained. Control seals should not need
to be replaced as long as the control shafts
are kept clean and lightly lubricated.
#6045 Canon ZR900
#6045 Canon MV200
PP RR EE PP AA RR AA TT II OO NN
PPAACCKKAAGGEEDD WWIITTHH HHOOUUSSIINNGG
• External UR/Pro Color Filter
• Silicone Lubricant
The installation and usage of the external UR/Pro color filter is described in the
general instruction manual.
OOPPTTIIOONNAALL WWIIDDEE AANNGGLLEE LLEENNSS
The lens port on the front of the housing accepts the optional wide angle lenses
offered by Epoque DCL-20, Inon UWL-100 and Sea&Sea 58070. These waterproof
lenses secure to the outside of the lens port, and are not marketed by Ikelite.
Should you elect to use the optional Epoque, Inon or Sea&Sea lens, carefully thread
the waterproof lens on the front of the lens port. The lens threads are very fine;
DO NOT cross thread. It should screw on very easily. If it is difficult to turn, you are
LLCCDD MMOONNIITTOORR // EEXXTTEERRNNAALL MMIIRRRROORR
The cameras LCD monitor can be viewed from the rear of the housing, using the
external mirror featured on the side of the housing.
During transportation, please remember to close the mirror by pressing it against
the side of the housing.
Open the LCD monitor on the camera, rotate 180°, and then press it back against
the side of the camera. The external mirror is hinged so that it can be opened to reflect
the image from the cameras LCD monitor for viewing from the rear of the housing.
The image is reversed in the LCD display. Looking in the mirror, Right is Left, Left
is Right as you view your subject.