Filter
Top Products
12 Kyocera QCP 6035 Smartphone User’s Guide
Checking status —the LED
The LED indicates the following states:
■ Green—Home. The phone is on and in its home area. The light flashes
slowly when you are not making a call, it flashes 3 times per ring when
you receive a call, and it shines without flashing during a call.
■ Amber—Roaming. The phone is on and in roaming mode. The light
flashes slowly when you are not making a call, it flashes 3 times per
ring when you receive a call, and it becomes solid during a call.
■ Red—No signal available. The phone is on and searching for a signal.
■ Rapid red flashes—Alerts. The LED flashes 5 times for incoming
messages or voice mail. It flashes 3 times for all other types of alerts.
■ No light—The phone is off.
Using the screen
When the flip is closed—The screen is not touch-sensitive. Use the shuttle
to open menus and make selections.
When the flip is open—The screen is touch-sensitive. Use the stylus to open
applications and make selections.
Calibrating the screen—If the screen seems unresponsive, do these steps.
1. Open the flip. With the stylus, tap to view the Applications
Launcher.
2. Tap the Prefs application.
3. Tap the in the upper-right corner of the screen. From the picklist,
tap Digitizer. Follow the instructions on the screen.