Filter
Top Products
63
Settings
Security Menu 9.6
Various codes and passwords are used
to protect the features of your phone.
They are described in the following
sections.
Lock Handset (Menu 9.6.1)
You can use a security code to avoid
unauthorized use of the phone.
If you set phone lock to When Power
On, the phone will request a security
code whenever you switch the phone
on. If you set the phone lock to When
SmartChip Changed, your phone will
request a security code only when
you change your SmartChip. If you set
the phone lock to Immediately, your
phone will lock immediately.
PIN Code Request (Menu 9.6.2)
When the PIN code request feature is
set to ‘Enable’, you must enter your PIN
each time you switch the phone on.
Consequently, any person who does
not have your PIN cannot use your
phone without your approval.
Note
Before disabling the PIN code
request feature, you must enter
your PIN.
The following options are available:
v On: You must enter the PIN each
time the phone is switched on.
v Off: The phone connects directly to
the network when you switch it on.
Fixed Dial Number (Menu 9.6.3)
Allows you to restrict your outgoing
calls to selected phone numbers, if this
function is supported by your SIM card.
The PIN2 code is required.
The following options are available:
v On: You can only call phone
numbers stored in the phonebook.
You must enter your PIN2.
v Off: You can call any number.
v FDN list: You can view the number
list saved as fixed dial number.