Filter
Top Products
Rack Installation
Issue 1 October 1998
3-15
How to connect the Cards to the Data Network
continued
Remote PC
Connectivity
PC COM port settings
Connect your Personal Computer (COM port)
or data terminal to the RS-232 port on the
remote module.
A 9-pin straight through cable will work for
many Personal Computers. An adapter is
needed if the PC does not have a 9-pin
connector.
NOTE: The RS-232 cable length must not exceed
50 feet.
Before data connectivity is operational, you must
make sure that the data settings on the Switch
Card, remote module, remote PC, and RAS or
Terminal Server all match.