Filter
Top Products
Call functions
12 Copyright © 2006 Nokia. All rights reserved.
Note: Using voice tags may
be difficult in a noisy
environment or during an
emergency, so you should
not rely solely upon voice
dialing in all circumstances.
1. In the standby mode, press and
hold the right selection key. A
short tone is played, and Speak
now is displayed.
If you are using a compatible
headset with the headset key,
press and hold the headset key to
start the voice dialing.
2. Say the voice command clearly. If
the voice recognition is
successful, a list with matches is
shown. The phone plays the voice
command of the match on the
top of the list. After about
1.5 seconds, the phone dials the
number; or if the result is not the
correct one, scroll to another
entry, and select to dial the entry.
Using voice commands to carry out a
selected phone function is similar to
voice dialing. See Voice commands
in ”My shortcuts” p. 35.
■ Answer or reject a voice
call
To answer a call, press the call key.
To mute the ringing tone before you
answer the call, select Silence.
To end the call or reject a call, press
the end key.
Call waiting
During a call, to answer the waiting
call, press the call key. The first call is
put on hold. To end the active call,
press the end key.
To activate the Call waiting function,
see ”Call” p. 41.
■ Options during a voice
call
Many of the options that you use
during a call are network services.
For availability, contact your
network operator or service provider.
Call options are Mute or Unmute,
Contacts, Menu, Lock keypad,
Record, Loudspeaker, or Handset.
Network services options are
Answer, Reject, Hold or Unhold, New
call, Add to conference, End call, End
all calls, and the following:
Send DTMF — to send tone strings.
Swap — to switch between the
active call and the call on hold.
Transfer — to connect a call on hold
to an active call and disconnect
yourself.
Conference — to make a conference
call that allows up to five
participants.