Nokia 6151 Cell Phone User Manual


 
Messaging
Copyright © 2006 Nokia. All rights reserved. 25
E-mail message centres > Add centre
— to set the phone numbers and
name of the e-mail center for
sending SMS e-mail. If you select
SIM e-mail centre, you can view the
SIM e-mail center information.
E-mail centre in use — to select the
SMS e-mail message center in use.
Message validity — to select the
length of time for which the network
attempts to deliver your message.
Messages sent via — to select the
format of the messages to be sent:
Text, Paging, or Fax (network
service).
Use packet data > Yes — to set GPRS
or WCDMA as the preferred SMS
bearer.
Character support > Full — to select
all characters in the messages to be
sent as viewed.
Reply via same centre > Yes — to
allow the recipient of your message
to send you a reply using your
message center (network service).
Multimedia message
The message settings affect the
sending, receiving, and viewing of
multimedia messages.
You may receive the configuration
settings for multimedia messaging
as a configuration message. See
”Configuration settings service”
p. xiii. You can also enter the
settings manually. See
”Configuration p. 43.
Select Menu > Messaging >
Message settings > Multimedia
messages and from the following
options:
Delivery reports > Yes — to ask the
network to send delivery reports
about your messages (network
service).
Image size (multimedia) — to define
the default image size used in
multimedia messages.
Default slide timing — to define the
default time between slides in
multimedia messages.
Allow multimedia recept. — to
receive or block the multimedia
message, select Yes or No. If you
select In home network, you cannot
receive multimedia messages when
you are outside your home network.
The default setting of the
multimedia message service is
generally In home network.
Incoming multim. msgs. — to allow
the reception of multimedia
messages automatically, manually
after being prompted, or to reject
the reception. This setting is not
shown if Allow multimedia recept. is
set to No.