Filter
Top Products
Settings
Copyright © 2006 Nokia. All rights reserved. 41
If you have saved data on the remote
Internet server, to synchronize your
phone, start the synchronization
from your phone.
Select Menu > Settings >
Connectivity > Data transfer >
Server sync. Depending on the
settings, select Initialising
synchronisation or Initialising copy.
If the contacts or calendar are full,
synchronizing for the first time or
after an interrupted synchronization
may take up to 30 minutes to
complete.
USB data cable
You can use the USB data cable to
transfer data between the memory
card inserted in the phone and a
compatible PC or a printer
supporting PictBridge. You can also
use the USB data cable with Nokia
PC Suite.
To activate the memory card for data
transfer or picture printing, connect
the USB data cable; when the phone
displays USB data cable connected.
Select mode., select OK and from the
following modes:
Default mode — to use the phone to
interact with applications on a PC
that has Nokia PC Suite installed.
Printing — to use the phone with a
PictBridge compatible printer.
Data storage — to connect to a PC
that does not have Nokia software
and use the phone as a data storage
device.
To change the USB mode, select
Menu > Settings > Connectivity >
USB data cable > Default mode,
Printing, or Data storage.
■ Call
Select Menu > Settings > Call and
from the following options:
Call divert — to divert your incoming
calls (network service). You may not
be able to divert your calls if some
call barring functions are active. See
Call barring service in ”Security”
p. 44.
Automatic redial > On — to make a
maximum of 10 attempts to connect
the call after an unsuccessful call
attempt.
Anykey answer > On — to set the
phone to answer an incoming call by
pressing any key except the power or
end keys.
Speed dialling > On — to dial the
names and phone numbers assigned
to the speed-dialing keys 2 to 9,
press and hold the corresponding
number key.