Filter
Top Products
Settings
60
■ Security settings
When first accessing the security
settings, enter the preset lock code.
The default setting for lock code is
12345. Depending on your wireless
service provider or network operator,
the preset lock code can be a five digit
number such as 12345 or 00000.
If none of these work, contact your
wireless service provider or network
operator for help.
Phone lock
The phone lock feature protects your
device from unauthorised outgoing
calls or unauthorised access to
information stored in the device. With
phone lock activated, Phone locked is
displayed each time you turn your
device on or off.
With the device locked, calls may still
be possible to the official emergency
number programmed into your device.
1. In standby mode, select Menu >
Settings > Security.
2. Enter the lock code, and select OK.
See “Change lock code”, p. 61.
3. Select Phone lock and one of the
following options:
Off—Immediately turns off the
device lock feature.
Lock now—Immediately turns on
the device lock feature.
On power-up—Turns on the device
lock feature the next time you turn
the device on.
With Lock now selected, you must
enter your lock code before the device
can function normally. With the lock
code accepted, your device functions
normally.
Call not allowed is displayed if you
attempt to place a call with your
device locked. To answer a call with
phone lock on, select Answer, or press
the call key.
Allow numbers
With phone lock on, the only outgoing
calls you can make are to the
emergency number programmed into
your device (for example, 111 or 000 or
911) or the number stored in the
Allowed no. when phone locked
location:
1. In standby mode, select Menu >
Settings > Security.
2. Enter the lock code, and select OK.
See “Change lock code”, p. 61.
3. Select Allowed no.’s (numbers)
when phone locked. With an empty
folder selected, select Assign, and
enter the phone number; or select
Assign > Search to recall the
number from your contacts list.
Select OK.
9243644_6155_en_au.fm Page 60 Wednesday, December 28, 2005 11:28 AM