Filter
Top Products
Important: Always enable one of the available encryption methods to increase
the security of your wireless LAN connection. Using encryption reduces the risk of
unauthorised access to your data.
About Wi-Fi WLAN
To use this service, you must obtain an unlicensed mobile access (UMA) subscription
from your service provider. The correct settings may already be configured in your
phone. For more information, contact your service provider.
The Wi-Fi WLAN function allows a seamless hand-off of mobile voice and data from the
mobile phone network to a WLAN according to the Wi-Fi specification. When your phone
is connected to a WLAN access point and you move out of range of this access point, the
roaming function tries to automatically connect your phone to another access point
belonging to the same network. If the WLAN connection is lost, your phone connects
automatically to the mobile phone network.
Your device supports voice calls over the internet (net calls). Your device attempts
emergency calls primarily over cellular networks. If an emergency call using cellular
networks is not successful, your device attempts an emergency call through your net
call provider. Due to the established nature of cellular telephony, you should use cellular
networks for emergency calls, if possible. If you have cellular network coverage
available, make sure that your cellular phone is switched on and ready to make calls
before you attempt an emergency call. The capability for an emergency call using
internet telephony depends on the availability of a WLAN network and your net call
provider's implementation of emergency call capabilities. Contact your net call provider
to check the internet telephony emergency call capability.
Turn the Wi-Fi WLAN function on or off
Select Menu > Settings > Connectivity > Wi-Fi > Wi-Fi radio and from the
following:
● Wi-Fi preferred — The phone connects to the Wi-Fi WLAN if available, otherwise to
the cellular network.
● Wi-Fi only — The phone only connects to Wi-Fi WLAN.
● Wi-Fi off — The phone only connects to the cellular network.
indicates that the Wi-Fi WLAN function is enabled.
Handover tone
To play a tone when the phone registers and deregisters on the WLAN, and when a voice
call is handed over to and from another calling network, select Menu > Settings >
Connectivity > Wi-Fi > Handover tone > On.
Quick connection
Connect in a convenient way to any available non-key requiring WLAN with the best
signal strength. Connections are attempted in the order of signal strength only to
networks that have not been saved.
Settings
© 2007 Nokia. All rights reserved.30