Filter
Top Products
[ 135 ]
Menu functions
SEND AND RECEIVE DATA
1 Ensure that the IR ports of
the sending and receiving
devices are pointing at each
other and that there are no
obstructions between the
devices.
The preferable distance
between the two devices
in an IR connection is from
3 inches to 3 feet.
2 Activate IR in your phone by
selecting Connectivity >
Infrared from the menus.
3 The user of the other device
should activate IR as well.
If data transfer is not started within two minutes after the activation of
the IR port, the connection is cancelled and must be restarted.
CONNECTION INDICATOR
•When is shown continuously, the IR connection is activated and
your phone is ready to send or receive data using its IR port.
•When blinks, your phone is trying to connect to the other device
or a connection has been lost.
• GPRS, HSCSD, CSD
With your phone you can use general packet radio service (GPRS),
high-speed circuit switched data (HSCSD), and circuit switched
data (CSD).
GPRS is a technology used to send and receive data using short bursts or
packets over the wireless network. With GPRS, you can stay connected to
the Internet and allow for faster downloads without completing a dial-up
connection. Applications using GPRS include the browser, text messaging
and dial-up connections for making digital data calls
3-ft maximum
distance