Insert or Remove the Battery
Get Started
6
Section 1: Get Started
Topics Covered
• Insert or Remove the Battery
• microSD Card
• Switch Your Device On or Off
• Charge the Battery
•Antenna
• How to Read This Guide
•Get Help
• Green Tips
This section describes how to start using your device after activating your services, how to contact customer support, and
how to read this guide.
Insert or Remove the Battery
Insert the Battery
1. To remove the back cover, with the back of the device facing you, press the release button,
and lift the back cover off the device.
2. Slide the battery into the slot by aligning the contacts and press until you hear the “click”.
3. Align the cover tabs with the slots on the back of the device and push down the tabs until
the cover is securely in place.
Remove the Battery
Always switch the device off and disconnect the charger before removing the battery.
1. To remove the back cover, with the back of the device facing you, press the release button,
and lift the back cover off the device.
2. Insert your finger into the finger grip, and lift the battery from its compartment.
3. To replace the back cover, align the cover tabs with the slots on the back of the device and
push down the tabs until the cover is securely in place.