Filter
Top Products
System
131
1999 Nokia Mobile Phones. All Rights Reserved.
Infrared activation
If you want to use the PC Suite for Nokia 9110 Communicator program (see
”To use the PC Suite” on page 39) with the infrared connection, or if you want
to receive data from another device via the infrared, you need to use the
Infrared activation application.
1 Make sure that the infrared port of the communicator faces the infrared
port of the PC or another device.
2 Open the Infrared activation application on the communicator.
3 Press Activate.
4 To end the infrared connection, press Disable.
To transfer data between two communicators
1 Make sure that the infrared ports of the communicators face each other.
2 Open the Infrared activation application on the receiving communicator.
3 In the sending communicator, go to the application from where you want
to transfer data, and press Transfer via IR.
Digital camera connectivity
The Digital camera connectivity application enables you to transfer images
between your communicator and a digital still camera or another
communicator via the infrared connection.
When you start the application, press Image list to open a list of the images in
the Downloaded files folder. However, you can only select image files with the
extensions UPF or JPG.
To transfer images from another device to the communicator
The connection to a digital camera or another communicator is always
established by the receiving communicator.
Note: A maximum of 20
files can be transferred at
a time.
Tip: The infrared link can also
be activated by pressing Chr-1
on the communicator keyboard.
Note: The infrared protocol of the
digital camera must be IrTran-P in
order to be compatible with the
Nokia 9110 Communicator.