Filter
Top Products
System
134
1999 Nokia Mobile Phones. All Rights Reserved.
Data removal
The Data removal application comes in handy if you want to remove personal
information from the communicator, for example, before lending it to
someone else. In this way you need not remove data one by one.
1 Select what kind of data you want to remove. The removable data is
arranged in four groups: All device data, Calendar data, Documents,
Contacts and speed dials.
2 Press Delete.
3 Before any data is removed, you must enter your lock code. See ”Security”
on page 127. When removing calendar data, you can choose to remove all
calendar data or only events that occur before a given date.
Install/Remove software
The Install/Remove software application enables you to install new software
from a PC to the communicator and later remove the software.
To use this application, you need to start the Nokia Communicator Server on
your PC and connect your communicator to the PC. See ”To use the Nokia
Communicator Server” on page 46.
Press Install and select the software you want to install, or press Remove and
select the software you want to remove.
The set of applications that were on the communicator at the time of
purchase cannot be removed. This is to ensure that the basic functions of the
communicator are always available.
Note: Even if you choose the All device data
option, your Internet settings will not be removed.
If you want to restore your communicator to the
same state it was in at the time of purchase, see
chapter 15 "Troubleshooting" on page 165.
Caution: Beware of viruses! Only install on
the Nokia 9110 Communicator software
you have obtained from sources that offer
adequate protection against viruses.
Tip: To save the memory space of
the communicator, you can install
software to a memory card.