Nokia 9110 Cell Phone User Manual


 
Phone
151
1999 Nokia Mobile Phones. All Rights Reserved.
together and disconnect yourself from both calls. See ”Multiple calls” on page
62. Note that not all network operators support this function.
Data — When you have an alternating call active, this option changes the
mode of the call from voice to fax. See ”Multiple calls” on page 62.
Voice — When you have an alternating call active, this option changes the
mode of the call from fax to voice.
Play last — Plays the last recording made with the recorder. The other party
will also hear the recording.
To search for phone numbers
You may fetch phone numbers from memory by the name with which the required
phone number was stored. Note that the phone uses memory (SIM or Telephone)
which is chosen in the Telephone application by pressing Menu and Select.
1 Press Names.
2 Key in the name of the person whom you want to call, or the first letter(s)
of the name.
3 Press OK. The name closest to the keyed in characters will appear.
4 If the name found was not the one you searched for, scroll through the
names with or until you reach the correct one.
5 To call the person, press . If the person has several phone numbers,
scroll the selection frame onto the one you want and press .
To view the phone number stored with the name
1 When the desired name is on the display, press Detail. The phone number
is displayed. If the person has several phone numbers, scroll through the
numbers with or until you reach the correct one.
2 To call the number, press .
To use speed dialling
Speed dialling is a handy way to call frequently-used phone numbers. You can
define up to eight speed dial numbers in the communicator memory. For
information on how to set speed dials, see ”To make contact cards” on page 51.
1 Key in the number of the speed dial location where you have stored the
Tip: If you have one active and one held call, press
Swap to make the held call active and to put the
currently active call on hold. In this way, you may
converse with one party without ending the other
call. You can also press to swap between the
calls if no numbers have been keyed in.