Filter
Top Products
Internet
94
1999 Nokia Mobile Phones. All Rights Reserved.
To fetch mail
E-mail addressed to you is not automatically received by your communicator,
but by a Remote mailbox, see figure 4. This is to let you determine which
messages you want to read and when. To read your mail, you must first
connect to your Remote mailbox and then select the messages you wish to
fetch onto your communicator. Connection to the Remote mailbox is
established via a data call.
If your Remote mailbox server is capable of sending you special short
messages, you will hear a tone - unless the system is set to a silent profile -
and see a note when new mail arrives in your Remote mailbox. The message
may also contain information about the mail message, in which case you can
either fetch or remove the mail by pressing Fetch or Delete in this SMS
message.
To connect to the Remote mailbox
The Mail and Internet access point settings must be configured correctly. Read
”Mail settings” on page 89, and follow the instructions given by your Remote
mailbox and Internet service providers.
1 Move the selection frame in the Mail main view over the Remote mailbox
and press Connect.
Unread messages in the Remote mailbox are marked with , unread
messages with attachments with and deleted messages with .
To fetch all new mail
1 Once you have connected to the Remote mailbox, press Fetch new.
2 All mail with the icon is fetched to the Received mail folder.
3 After all new mail has been fetched, connection to the Remote mailbox is
closed and the Received mail folder opens.
To fetch a selected message
1 Select the mail message(s) you want to fetch and press Fetch selected.
2 After the mail has been fetched, the Remote mailbox view returns.
Figure 4