Filter
Top Products
nokia
CONNECTING PEOPLE
PAGE 24 (27) Approved 1.0
CMO Operations & Logistics
MGR
WW Competence Transfer
Multimedia Creation & Support CONFIDENTIAL 18.11.2005
Bochum / Ge
Service Manual 9300i Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved.
rmany
14. BLUETOOTH & INFRARED TEST
Bluetooth test
You need another Bluetooth device (e.g. 6230) to do a GoNoGo test.
Make sure that Bluetooth is activated in the reference unit. The distance of the devices should be not more than
5m from each other.
Infrared test
You need another infrared device (e.g. 6230) to do a GoNoGo test. The infrared windows of the devices must be
directed to each other and should have a distance of approximate 15 cm. Make sure that infrared is activated in
receiver device.
Warning: Do not point the IR (infrared) beam at anyone’s eye or allow it to interfere with other IR devices. This
device is a Class 1 Laser product.
Reference unit, Bluetooth /infrared activated Test unit
Settings on the test unit:
From Desk Menu select .
In Contacts directory select My contacts card and select New card.
Create one new contact. Type for e.g. “test” and acknowledge it with
Done.
Select your entry “test” and press the key.
For infrared test: Select: File-->Send-->Via infrared
If sending of business card fails, make sure again that infrared
windows are directed to each other and infrared is activated in
reference device. Then try again sending. Test was successful, if you get
a message on receiver device.
For Bluetooth test: Select: File-->Send--> Via Bluetooth
Activate Bluetooth if not already done.
Search window appears, if all Bluetooth devices in range will be
displayed, the test is successful!
Note: Bluetooth is activated!