Filter
Top Products
36 Copyright © Nokia 2004
Scale image down—to define the image size when you insert the image to the
multimedia message.
Default slide timing—to set the timing for slides in multimedia messages.
Allow multimedia reception > No, Yes, or In home network—to use the multimedia
service. If you select In home network, you cannot receive multimedia messages outside
your home network.
Incoming multimedia messages > Retrieve—to set the phone to automatically fetch newly
received multimedia messages. Select Reject if you do not wish to receive multimedia messages.
Connection settings—to define connection settings for retrieving multimedia messages.
First select Active multimedia settings, and activate the set in which you want to save the
settings. Select Edit active multimedia settings and edit the active settings.
Select each of the settings one by one and key in all the required settings. Contact your
service provider for the settings.
Allow adverts—to receive or reject advertisements. The setting is not shown if Allow
multimedia reception is set to No.
• E-MAIL SETTINGS
You may receive the e-mail connection settings as an over-the-air message from the service
provider. For receiving the settings over the air, see “Over-the-air settings service” on page 18.
For keying in the settings manually, select Menu > Messages > Message settings >
E-mail messages > Active e-mail settings.
You must first activate a mailbox. Select Mailbox in use and activate the mailbox for which you
want to save the settings. Select Activate > Edit active e-mail settings and edit the settings.
Select each of the settings one by one and key in all that are required. Contact your or
e-mail service provider for the settings.
Mailbox name—key in the name that you want to use for the mailbox.
E-mail address—key in your e-mail address.
My name—key in your name or nickname if you want the recipient to see it.
Outgoing (SMTP) server—key in the address of the e-mail server.
Outgoing (SMTP) port—key in the number of the e-mail server port for outgoing e-mail.
The most common default value is 25.
Use SMTP authorization—if your e-mail service provider requires authentication for sending
e-mails, set the setting to on. You must also define your SMTP user name and SMTP password.
SMTP user name—key in the user name for outgoing mails that you have obtained from
your e-mail service provider.
SMTP password—key in the password that you want to use for outgoing mails. If you have
not defined a password, you may be asked to define one when your phone connects to your
e-mail account.
6820.CENv1_9231553.book Page 36 Tuesday, November 23, 2004 3:50 PM