Filter
Top Products
Nokia 6820 User Guide 53 Copyright © Nokia 2004
Settings
Operator selection > Automatic—to set up the phone to automatically select one of the
cellular networks available in your area.
If you select Manual, you can select a network that has a roaming agreement with your
service provider. If No network access is displayed, you must select another network. The
phone stays in manual mode until the automatic mode is selected or another SIM card is
inserted into the phone.
Confirm SIM service actions—to receive confirmation messages when SIM services are
being used. For more information, see “SIM services” on page 79.
Help text activation—to set the phone to show the help topics.
Start-up tone—to set the phone to play a start-up tone when it is switched on.
• ENHANCEMENT SETTINGS
The enhancement settings menu is only shown if the phone is or has been connected to
some mobile enhancements (accessories), such as a charger or hands-free unit.
Select Menu > Settings > More Settings > Enhancement settings. Then select an
appropriate enhancement from a list, if the corresponding enhancement is or has been
connected to the phone. You can select the following options:
Default profile—to automatically activate the desired profile when you connect to the
selected enhancement. You can select another profile while the enhancement is connected.
Automatic answer—to set the phone to automatically answer an incoming call after five
seconds. If the Incoming call alert is set to Beep once or Off, automatic answer will not
be used.
Lights—to set the lights permanently to On. Select Automatic to set the lights on for 15
seconds after a keypress. The Lights option is available only when Handsfree is selected.
When the phone is connected to the full car kit, select Ignition detector and On to
automatically switch off the phone approximately 20 seconds after you have switched
off the ignition.
For the Loopset, select Use Loopset.
For Text phone, select Use text phone and select Yes to use the text phone settings instead
of headset or loopset settings.
• SECURITY SETTINGS
To work with security settings, select Menu > Settings > More settings > Security settings,
and select the setting you would like to modify.
Note: When security features that restrict calls are in use (call restricting, closed
user group, and fixed dialing), calls may be possible to certain emergency numbers
in some networks.
6820.CENv1_9231553.book Page 53 Tuesday, November 23, 2004 3:50 PM