Filter
Top Products
Copyright © 2000-2002 Nokia. All rights reserved.
240
Extras
Note: Using the communicator as a fax modem requires that data calls are
supported by the network operator and that this service is active in your
SIM card.
To install fax modem driver using cable
connection
1 Start Windows.
2 Insert the Nokia 9210i CD-ROM into the CD-ROM drive of the computer and
locate the modem information file (mdmn9210i.INF). Alternatively, you can
find the file on the www.forum.nokia.com Web site.
3 Double-click the Modems icon in the Windows Control Panel. A dialog opens. If
no modem drivers have been installed on the computer before, continue from
step 6.
4 Click the Add button.
5 In the field What type of modem do you want to install? select Other. Click Next
6 Select the option Don’t detect my modem; I will select it from a list
7 Click Have disk...
8 Click Browse and locate the CD-ROM drive with the Nokia 9210i CD-ROM.
9 On the CD-ROM, locate a folder Software for PC/Modem drivers
10In the Modem drivers folder, select Mdmn9210i.inf file and click Open or OK.
Tip: To use High Speed
connection, your GSM
operator must activate High
Speed Data Services on your
SIM card.
11In the Install from disk dialog, Click OK.
12In the Install New Modem dialog, select Nokia 9210 Communicator (Cable). If you
are using High Speed connection (HSCSD), select a speed higher than 9600 bps
and cable connection. Click Next.
13Select the COM port where the serial cable is connected. Click Next.
14Click Finish.