Filter
Top Products
Copyright © 2000-2002 Nokia. All rights reserved.
242
Extras
Note: You cannot change fax modem settings if the fax modem is activated. To
change these settings, make sure that fax modem is not active.
Open Fax modem and press Settings. A dialog with two pages opens.
Define the following:
Connection page
Connection type: Press Change to change this option. The options are Infrared and
Cable. If you select Infrared, the rest of the options are automatically set.
If you select Cable, define also the following:
Transfer rate: The speed with which the data is transferred between your
communicator and PC. The best transfer rate for normal GSM calls is
19200. For high speed calls, you should select 115200. Select the same
rate in your PC application as well.
Data bits: Defines how many bits are used to form a byte. The default option, 8, can
typically be used.
Parity: A parity error-checking procedure. The default option, None, can typically
be used.
Stop bits: Defines number of stop bits used. The default option, 1, can typically be
used.
Flow control: It is recommended to select Software. This setting needs to be the
same in you PC as well.