Filter
Top Products
Copyright © 2000-2003 Nokia. All rights reserved.
61
Phone
Change of access codes (3-3-5)
In this submenu, you can change the lock code, the PIN code, the PIN2 code and
the barring password. See ‘Security’ on page 218.
The access codes may only include the digits 0 to 9.
Lock system (3-3-6)
Tip: You can also press
Menu and # to enter your
lock code.
In this submenu, you can lock the communicator. Press Select and enter your lock
code. The communicator locks immediately. When your communicator is locked,
you can make emergency calls to predefined numbers using the cover phone. You
can also answer incoming calls and make emergency calls using the Telephone
application. All other actions are blocked. Even if you remove and replace the
battery and switch on the phone, the communicator will remain locked. To unlock
the communicator, press Unlock and enter the lock code. For more information on
locking and other security options, see ‘Security’ on page 218.
IMPORTANT: The default lock code is 12345. For security reasons, it is
imperative that you change the lock code. Keep the code secret and in a
safe place, separate from the communicator. For information on
changing the lock code, see section ‘Security’ on page 218. Note that no
passcode system can guarantee absolute prevention of unauthorised
access.
Restore factory settings (3-4)
You can reset some of the menu settings to their original values. You need the lock
code for this function. This function will not affect stored phone numbers and
names, access codes, earpiece volume setting, call timers, cost counters, selected
application tones or SMS messages.