Filter
Top Products
To create an access point group, select Access point groups > Options > New group. In the Group name field, enter a name for
the group. In the Conn. switching field, define whether to show the connection switching process on the display of your device.
Select and edit the access points that belong to this group in the Access points section.
To add an access point to the selected access point group, select Access points > Options > Add access point and the access point
to add.
To edit an access point in an access point group, select the access point and Options > Edit.
To remove an access point in an access point group, select the access point and Options > Remove.
To set the order in which access points are used for e-mail data roaming, select an access point group and Change. Select an
access point and Options > Raise priority or Lower priority.
Packet data
Select Menu > Settings > Config. > Connection > Packet data.
Your device supports packet data connections, including GPRS in the GSM network. When you are using your device in a GSM
network, it is possible to have multiple data connections active at the same time; access points can share a data connection,
and data connections remain active during voice calls. See "Connection manager," p. 64.
Packet data configuration
The packet data settings affect all access points using a packet data connection.
Select from the following settings:
• Packet data conn. — Select When available to register the device to the packet data network when you switch the device on
in a supported network. Select When needed to establish a packet data connection only when an application or action requires
it.
• Access point — Enter the access point name provided by your service provider to use the device as a packet data modem to
your computer.
These settings affect all access points for packet data connections.
Session initiation protocol (SIP) configuration
Select Menu > Settings > Config. > Connection > SIP settings.
Session initiation protocols (SIP) are used to create, modify, and terminate certain types of communication sessions with one
or more participants (network service). SIP profiles include settings for these sessions. The SIP profile used by default for a
communication session is underlined.
Select Menu > Settings > Config. > Connection > SIP settings.
To create a SIP profile, select Options > Add new > Use default profile or Use an existing profile.
Select a SIP profile to edit.
Select the SIP profile you want to use for communication sessions and Options > Default profile.
To delete a SIP profile, select it, and press the backspace key.
Select Menu > Settings > Config. > Connection > SIP settings > Options > Add new or Edit.
Select from the following settings:
• Profile name — Enter a name for the SIP profile.
• Service profile — Select IETF or Nokia 3GPP.
• Default access point — Select the access point to use for the Internet connection.
• Public user name — Enter the user name received from your service provider.
• Use compression — Select if compression is used.
• Registration — Select the registration mode.
• Use security — Select if security negotiation is used.
• Proxy server — Enter the proxy server settings for this SIP profile.
• Registrar server — Enter the registration server settings for this SIP profile.
The settings available for editing may vary.
Select Menu > Settings > Config. > Connection > SIP settings > Options > Add new or Edit > Proxy server.
Proxy servers are intermediate servers between a browsing service and its users used by some service providers. These servers
may provide additional security and speed up access to the service.
Select from the following settings:
• Proxy server address — Enter the host name or IP address of the proxy server in use.
• Realm — Enter the proxy server realm.
• User name and Password — Enter your user name and password for the proxy server.
S e t t i n g s
Copyright © 2006 Nokia. All Rights Reserved. 31