Filter
Top Products
12. Security
Device security
Select Menu > Settings > Configuration > Security > Phone and SmartChip.
You can modify the security settings for the PIN code, automatic lock, and SmartChip change, and change codes and passwords.
Avoid using codes that are similar to emergency numbers to prevent accidental dialing of the emergency number.
Codes are shown as asterisks. When you change a code, enter the current code, then the new code twice.
Define security settings
To define device and SmartChip settings, select a setting and Options > Change.
When calls are limited to closed user groups, calls may be possible to the official emergency number programmed into your
device.
Define the following settings:
• PIN code request — Select On to request that the PIN code is entered each time the device is switched on. This setting cannot
be changed if the device is switched off. Some SmartChips do not allow turning off the PIN code request.
• PIN code — Change the PIN code. The PIN code must be 4 to 8 numbers long. The PIN code protects your SmartChip against
unauthorized use and is provided with the SmartChip. After three consecutive incorrect PIN code entries, the PIN code is
blocked, and you need to use the PUK code to unblock it before you can use the SmartChip again. If you did not receive the
PIN code with the SmartChip, or if you require a PUK code, contact your service provider.
• PIN2 code — Change the PIN2 code. The PIN2 code must be 4 to 8 numbers long. The PIN2 code is required to access some
functions of the device and is provided with the SmartChip. After three consecutive incorrect PIN2 code entries, the PIN2 code
is blocked, and you need to use the PUK2 code to unblock it before you can use the SmartChip again. If you did not receive
the PIN2 code with the SmartChip, or if you require a PUK2 code, contact your service provider.
• Autolock period — Set a time-out after which the device is automatically locked and can be used only if the correct lock code
is entered. Enter a number for the time-out in minutes, or select None to turn off the autolock period. When the device is
locked, you can still answer incoming calls and calls may still be possible to the official emergency number programmed into
your device.
• Lock code — Change the lock code. The new code can be 4-256 characters long. Numeric and uppercase and lowercase
alphabetic characters can be used. The device notifies you if the lock code is not properly formatted. The device remembers
the previously used lock codes and prevents you from using the same lock code several times. The preset code is 12345. To
avoid unauthorized use of your device, change the lock code. Keep the new code secret and in a safe place separate from
your device.
• Lock if SChip changed — Set the device to ask for the lock code when an unknown, new SmartChip is inserted into your device.
The device maintains a list of SmartChips that are recognized as the owner’s cards.
• Allow remote lock — If you set this option on, you can lock the device by sending a predefined text message from another
phone. When you set this option on, you need to enter the remote lock message and confirm the message. The message
must be at least 5 characters long.
• Closed user group (network service) — Specify a group of people to whom you can call and who can call you.
• Confirm SChip services (network service) — Set the device to display confirmation messages when you are using a SmartChip
service.
Change the restriction password
To change the password used for restricting voice and data calls, select Menu > Settings > Configuration > Call restriction >
Cellular call restriction > Options > Edit restr. password. Enter the current code, then the new code twice. The restriction password
must be four digits long. For details, contact your service provider.
Fixed dialing
When fixed dialing is activated, calls may be possible to the official emergency number programmed into your device.
Select Menu > Address Book > Options > SmartChip contacts > Fixed dialing contacts.
With the fixed dialing service, you can restrict calls from your device to only certain phone numbers. Not all SmartChips support
the fixed dialing service. Contact your service provider for more information.
Select Options, and select from the following options:
• Activ. fixed dialing — Restrict calls from your device. To cancel the service, select Deact. fixed dialing. You need your PIN2
code to activate and deactivate fixed dialing or edit your fixed dialing contacts. Contact your service provider if you do not
have the code.
Copyright © 2006 Nokia. All Rights Reserved. 80