Filter
Top Products
E-8
Fitting the mode dial knob E-22
Insertion of silica gel
E-22
Check the loading status.
E-23
Seal the Case. E-23
Install the special balance weight. E-24
Installation and Removal of the LCD Hood
E-24
Installation
E-24
Removal
E-24
Mounting and Removing the Lens Cap
E-25
Perform the final checks.
E-25
Visual Inspection
E-25
Setting the camera power to ON and OFF. E-25
Try to move the mode dial.
E-25
Final Test
E-26
4. Taking Pictures Under Water E-27
How to Use the Hand Strap E-27
Take pictures carefully.
E-27
Confirm the picture on the LCD monitor. E-27
Quietly press the shutter lever.
E-27
Caution when using the flash
E-27
5. Handling After Shooting E-28
Wipe off any waterdrop. E-28
Take out the digital camera.
E-29
Wash the Case with pure water.
E-30
Dry the Case.
E-30
6. Maintaining the Waterproof Function E-31
Remove the O-ring. E-31
Remove any sand, dirt, etc.
E-31
Install the O-ring.
E-32
How to Apply Grease to the O-ring
E-32
Maintenance of the threaded sections on the
TTL cable and TTL cable connector
E-33
Maintenance of the TTL Connector Cap
E-33
Replace consumable products.
E-34
7. Appendix E-35
Q & A on the use of the PT-023 E-35
After-sale Service
E-40
Specifications E-41
Diver's Insurance Guide E-41