Filter
Top Products
Using Your Treo 700P Smartphone 203
Beaming information
Receiving beamed information
0
5. Select the application you want to transfer.
6. Select Beam.
7. When the Beam Status dialog box appears, point the IR port on
your smartphone directly at the IR port of the receiving device.
8. Wait for the Beam Status dialog box to indicate that the transfer is
complete before you continue using your smartphone.
Tip
If you do not select a
category upon
receiving a beamed
item, the item
is placed in the Unfiled
category.
Tip
If you can’t receive
beamed information,
make sure the Beam
Receive option is
turned on (see
Optimizing power
settings), and that you
are not running a third-
party application that
disables beaming. If
you still can’t receive a
beam, try a soft reset
(see Resetting your
smartphone).
1. Turn on your screen.
2. Select the beam command on the transmitting device.
3. Point the IR port on your Treo smartphone directly at the IR port of
the transmitting device to open the Beam Status dialog box.
4. When the Beam Status dialog box appears, select a category for
the entry.
5. Select Yes to receive the information or No to refuse it.