Palm Pre Cell Phone User Manual


 
100 Section 2C: Phone
Use your phone without the headset: Disconnect the headset.
Set Up and Use a Bluetooth
®
Hands-Free Device
Your phone is compatible with many headsets and car kits (sold separately) enabled with
Bluetooth
®
wireless technology version 2.1 with EDR and Stereo (with AVRCP media controls).
After you set up a connection with a Bluetooth headset or hands-free car kit, you can
communicate with that device whenever it is within range and the Bluetooth feature on your
phone is turned on. The range varies greatly, depending on environmental factors. The
maximum is about 10 meters (30 feet).
1. Open
Bluetooth .
2. If the Bluetooth setting at the top of the screen is off, tap Off to switch the Bluetooth
feature from Off to On
3. Tap Add device and tap the device name.
4. To use a Bluetooth device with your phone, follow the instructions that came with the
Bluetooth device.
5. To switch to another Bluetooth device while on a call: Tap and tap the new device
name. (You can also tap Handset or Speaker to use your phone without the headset.)
Note
You can use a stereo (A2DP-enabled) Bluetooth headset to listen to MP3
files on your phone. You cannot, however, use a mono Bluetooth headset to
listen to MP3 files.
Tip
If you make a Bluetooth connection with a car kit, you might get a
notification on your phone asking if you want to upload contacts to the car
kit. Tap Allow to upload contacts. If you later want to delete the contacts
from the car kit, check the car kit documentation for instructions.