Filter
Top Products
Changing Your Settings 107
Configuring your Network Profiles
Use this menu option to select and edit the profile for connecting
your phone to a network. Although you can change the active
connection, it is recommended that this only be done with
assistance from your service provider.
Note:
Network Profiles are pre-configured by your service provider and the
default profile is pre-set. If you change the settings without consulting
your service provider, the web browser and MMS features may not work
properly.
1. In Idle mode, press Settings Connectivity
Network Profiles and press the Select soft key or the
key.
2. Highlight one of the available options and press the
View
soft key.
– or –
To create a new connection, press Options New, and
press the Select soft key or the key.
3. Select the parameter you want to edit:
•
Set Name
: enter a profile name.
•
Access Name
: edit the access point name.
•
Auth Type
: select the type of authentication used for this WAP
connection: None, Normal, or Secure.
•
User ID
: enter the User ID required to connect to the network.
•
Password
: enter the user password required to connect to
the network.
•
Protocol
: set the connection protocol used by the WAP browser:
WAP, HTTP, or Other.
•
Home URL
: enter the URL address of the page to use as
your homepage.
• Gateway Address
: Enter the Gateway Address. This option only
appears when the Protocol is set to WAP.
• Secure Connection
: Select On or Off depending on whether or
not you have a secure connection. This option only appears when
the Protocol is set to WAP.
•
Proxy Address
: set the proxy server address and port.
•
Linger Time (sec.)
: set a time period (in seconds) after which the
network is disconnected if there is no new data traffic.
Applications Settings
The Applications Settings feature allows you to configure the
functional parameters for most of the included applications. These
applications are described in more detail within other sections of
this manual.
1. In Idle mode, press Settings Applications
Settings and press the Select soft key or the key.