Filter
Top Products
Tools 71
Speak clearly when giving your command. There is no need for
you to speak slowly or with added emphasis. The voice recognition
software has been optimized to understand your speech in its
natural form. If it does not recognize your command after a few
seconds, a voice prompt asks you to repeat the command. If it
does not recognize your command again, the following message
displays “Sorry, no match found,” and voice recognition turns off.
You must end your current Voice Commands call before you can
make another call using Voice Commands. You can only originate
the first call in a 3-way call using Voice Commands.
Voice Recognition Tips
•
Wait for the tone before you speak.
•
Speak clearly and at a normal volume.
•
There is no need to use paused speech. The voice recognition software
has been trained to recognize natural speech, and performs best when
you speak naturally.
•
In very noise environments, it may be helpful to use a headset or a
Bluetooth headset.
Contacts List Voice Activation
On startup, Nuance Voice Recognition software reads your
Contacts list and voice-activates all the names.
When you add or change contacts, the software automatically
reloads and voice-activates the list when you add or modify a
contact.
Record Audio
Record Audio allows you to record voice memos. It also allows you
to send your audio clip to other people as an attachment to an
MMS message. Recording time is limited to free memory space
available. Recorded audio clips are saved to the Recorded Audio
folder (see “Audio” on page 65).
1. In Idle mode, press
Tools
, and press the Select
soft key or the key.
2. Highlight Record Audio and press the Select soft key or
the key.
3. Options before the audio recording is made are:
•
Record
: allows you to start recording an audio clip.
• My Voice Clips
: allows you to view your audio clips.
•
Record Audio Settings
: allows you to set the Default Name and
Recording Time (1 minute, 2 minutes, 3 minutes, 4 minutes, 5
minutes, 60 minutes, or Limit for MMS).
1Press the key to begin recording. Speak clearly into the
microphone.