Filter
Top Products
Settings
153
Calibration
The Calibration function allows you to re-align the screen’s touch accuracy
if the device does not respond properly to your touch.
1. From the Idle screen, touch
Settings
Phone
Calibration.
2. Carefully touch the center of each target displayed.
3. Touch Yes to confirm and save the new settings.
Note: Accurate calibration requires that you carefully touch the centre of each target. This is
more easily done if you place the phone on a flat surface rather than holding it in your hand.
Motion Detection
The Motion Detection feature can be used to mute an incoming call or
alarm, activate snooze when an alarm sounds, and start and restart the
timer.
1. From the Idle screen, touch
Settings
Phone
Motion
Detection.
2. Touch On to activate the Motion Detection feature, touch Off to
deactivate it.
For more information on using Motion Detection see “Other Answer
Options” on page 35, “Turning Off an Alarm” on page 131, and “Timer” on
page 140.
Auto Keypad Lock
The Auto Keypad Lock feature locks your phone whenever the backlight
turns off. Press
to
unlock the keypad.
1. From the Idle screen, touch
Settings
Phone.
2. At the Auto Keypad Lock field, touch On or Off.
LOCK