Filter
Top Products
Saving a PCS Ready Link Number
You can save a PCS Ready Link number by entering the number or
from the ending display. If the number is already stored in the Personal
List, the “save” softkey does not appear.
To save by entering the number:
1. From the PCS Ready Link List, enter the number you want to
save and press .
2. Highlight Save to Personal and press .
3. Enter a name under Name and press .
4. Press Save (left softkey) to complete saving.
Tip:If you make a PCS Ready Link call from standby mode or the number is
already stored in the Personal List, Save to Personal does not appear.
To save from the ending display of a PCS Ready Link Call:
1. From the ending display, press Save (right softkey).
2. Press Yes (left softkey).
ⅷ
If the entry has no name, you are prompted to enter a name.
Adding a New Contact
You can add up to 200 entries to the Personal List.
To add a new contact:
1. From the PCS Ready Link List, press Go to (left softkey),
highlight Personal List, and press .
2. Highlight Personal List or an entry and press Options (right
softkey).
3. Highlight New Contact and press .
ⅷ
If the Personal List is full or if you are not authorized to edit
the Personal List, you will see the warning on the display.
4. Enter a name under Name and a number under Number and
press .
ⅷ
You can also save the contact without a name by pressing
before entering.
5. Press Save (left softkey).
Tip:You are not allowed to use the following symbols during step 4: “:”, “@”, “;”,
“/”, “*”, “)” and “(”.
Section 2: Understanding Your PCS Phone
2A:Your PCS Phone – The Basics 32