Filter
Top Products
To turn on smile detection
1
From your Home screen, tap , then find and tap .
2
If the still camera is not selected, tap .
3
To display all settings, press .
4
Tap Capturing mode > Smile detection.
5
Tap Smile level and select a setting.
To take a photo using smile detection
1
When the camera is open and Smile detection is set, point the camera at your
subject. Each detected face is framed (not more than five faces). The camera selects
which face to focus on. A green frame shows the face in focus.
2
The camera automatically takes the photo when the subject in focus smiles.
3
If no smile is detected, press the camera key fully down to take the photo.
Adding the geographical position to your photos
Turn on geotagging to add the approximate geographical location (a geotag) to photos
when you take them. The geographical location is determined either by wireless networks
(mobile or Wi-Fi® networks) or GPS technology.
When appears on the camera screen, geotagging is turned on but the geographical
position has not been found. When appears, geotagging is turned on and the
geographical location is available, so your photo can get geotagged. When neither of these
two symbols appear, geotagging is turned off.
To turn on geotagging
1
From your Home screen, tap
, then find and tap .
2
Press , then tap Geotagging.
3
Tap On.
4
Tap OK to agree to enable GPS and/or wireless networks.
5
Check the options you want to select under My Location.
6
After you confirm your settings, press
to return to the camera screen.
7
Make sure your location has been found. When appears on the camera screen,
your location is available and your photo can get geotagged.
Using still camera settings
To select still camera settings
1
From your Home screen, tap , then find and tap .
2
If the still camera is not selected, tap .
3
To display all settings, press .
4
Tap the setting you want to select.
To customize the still camera settings panel
1
When the camera is open, press to display all settings.
2
Touch and hold the setting you want to move and drag it to the desired position.
If you drag the setting outside of the settings panel, the change is canceled.
Still camera settings overview
Capturing mode
Select the way you take a photo
Normal
Scene recognition
The camera determines which scene is most suitable. A scene icon and text appears when the scene is
selected.
83
This is an Internet version of this publication. © Print only for private use.