Sony Ericsson CMD-J70 Cell Phone User Manual


 
40 GB
Call Settings
} † Settings } Call Settings
Caller ID
Choose whether or not you want the party you
are calling to see your telephone number.
Select Caller ID from the Call Settings menu.
Use the Jog Dial to select On, Off or Default
(network default).
Call Waiting
If activated, your phone will alert you (beep)
that a call is waiting so that you don't miss
any calls. Select Call Waiting and use the Jog
Dial to select Activate, Cancel or Check
Status.
Select Line
Some Network Operators offer the possibility
to select between two separate phone lines on
your SIM card. This is useful e.g. for
separating business and private call costs.
To make a line selection in standby mode,
press and hold and use the Jog Dial to
make your selection. 1 or 2 will appear so that
you know which line is active. It is also
possible to make the line selection using the
Call Settings menu option.
Some menu items may not appear in your
phone in some networks unless you
specifically subscribe for them. The following
settings (e.g. Divert, Security, Ringer Tone,
Call Waiting and Voicemail) will apply to the
currently selected line. Some items such as
your own number entry and voicemail entry
may not be edited. All calls made will be
billed to the currently selected line. The Call
Time and Call Cost settings however, will
always show the total time or cost of both
lines.
Some of the following features may not be
supported by some networks.
01GB01COV-AE4.book Page 40 Tuesday, October 16, 2001 11:59 AM