Filter
Top Products
41 GB
Getting
Started
Your Sony
CMD-Z7
Basic
Operation
Menu
Operation
Appendix
Call Settings
} † Settings } Call Settings
Caller ID
Choose whether or not you want the party you
are calling to see your telephone number.
Select Caller ID from the Call Settings menu.
Use the Jog Dial to select On, Off or Default
(network default).
Call Waiting
If activated, your phone will alert you (beep)
that a call is waiting so that you don't miss
any calls. Select Call Waiting and use the Jog
Dial to select Activate, Cancel or Check
Status.
Select Line
Some Network Operators offer the possibility
to select between two separate phone lines on
your SIM card. This is useful e.g. for
separating business and private call costs.
To make a line selection in standby mode,
press and hold and use the Jog Dial to
make your selection. 1 or 2 will appear so that
you know which line is active. It is also
possible to make the line selection using the
Call Settings menu option.
Any Key Answer
Answer a call by pressing any key on the
keypad.
Select Any Key Answer and use the Jog Dial
to select On or Off.
Some of the following features may not be
supported by some networks.
Some menu items may not appear in your phone in
some networks unless you specifically subscribe for
them. The following settings (e.g. Divert, Security,
Ringer Tone, Call Waiting and Voicemail) will apply
to the currently selected line. Some items such as
your own number entry and voicemail entry may not
be edited. All calls made will be billed to the cur-
rently selected line. The Call Time and Call Cost
settings however, will always show the total time or
cost of both lines.
01GB01COV-AE4.book Page 41 Friday, August 10, 2001 3:36 PM