Filter
Top Products
Installation
Fixed Wireless Terminal: G30 and G35 models 11
Switch on the FWT
Connect the power supply. The FWT switches on automatically and the
LED indicators start flashing.
Note: If the Power LED is off, there is a problem with the power
supply. Please refer to the topic Troubleshooting documented on
page 28 for more detailed information.
Enter PIN
Most SIM cards are protected with a PIN (Personal Identity Number),
which you get from your network operator and which you need in order to
access the network. If the SIM card is not protected by a PIN code, then
you do not need to enter a PIN.
The FWT starts the network search automatically. If the SIM card is
protected by the PIN code, then the LEDs will flash simultaneously.
Please follow these steps before you enter your PIN:
1. Pick up the telephone and dial the PIN code. Press the # key on your
telephone or wait until you hear a beep tone.
2. If you make a mistake while entering your PIN, hang up the telephone
and try again.
If the PIN is correct, you will hear a beep over the telephone (positive
indication tone). If it is incorrect, a deep tone will sound (error indication
tone).
If the PIN is entered incorrectly three times, the SIM card will be blocked.
If this happens, you can unblock it by using the PUK (Personal Unblocking
Key), which you also may get from your network operator. Please refer to
the topic SIM Card Security documented on page 26 for more detailed
information.