Filter
Top Products
Advanced Features
24 Fixed Wireless Terminal: G30 and G35 models
To end the conference call, hang up the telephone. To release a specific
call from the conference group: press R1X
R1X R1X
R1X (where X is the number of
order of the call).
To choose one call from the multiparty in order to have a private
communication, putting the rest of the conference calls on hold: press
R2X
R2X R2X
R2X (where X is the number of order of the call you want to communicate
with).
Explicit Call Transfer
To transfer a call to another destination number (B-number).
• Put the ongoing call on hold (press R
RR
R) and dial the B-number.
• Now you can connect this new call, which is ongoing, with the
call you have put on hold, but abandon the conversation
yourself. To do this, press R4
R4R4
R4.
Phonebook / Abbreviated Dialing
You can store telephone numbers in either the SIM card memory or the
FWT memory. Up to 99 telephone numbers can be stored in each of
them.
The following table shows how to manage the phonebook with the 99
memory positions (Pos).
Warning: The position must always consist of two digits. For
example, memory position number 1 has Pos=01
To manage
the
phonebook in
…
With Function
…
Dial … You will hear…
Store **51*Pos*Phone number# 1 beep
Delete #51*Pos# 3 beeps
Check position *#51*Pos*Phone number#
1 beep if stored
3 beeps if not stored
SIM card
memory
Dial Pos# Dialing …
Store **51*Pos*Phone number*1# 1 beep
Delete #51*Pos*1# 3 beeps
Check position *#51*Pos*Phone number*1#
1 beep if stored
3 beeps if not stored
Terminal
memory
Dial Pos* Dialing …
Note: If instead of hearing beeps you hear a deep tone, this means
that there has been an error in the activation or deactivation.