Filter
Top Products
17
Making and Answering Calls
One-ring Indicator
indicator (red) on the Incoming History screen indicates
you have received a one-ring call (a call rang for three
seconds or shorter). Be careful when you return a call to an
unknown caller.
Adjusting the Earpiece Volume
during a Call
During a call, use j.
u: Increases the volume.
d: Decreases the volume.
Press c (OK).
Turning On Manner Mode
When the standby screen is displayed, hold down
# for at least one second.
This turns on manner mode, and displays , and on
the standby screen. This also turns on Answer memo,
which is indicated by
on the standby screen.
Turning Off Manner Mode
When the standby screen is displayed, hold down # for
at least one second.
Turning off manner mode causes
, and to disappear
from the standby screen. Answer memo is also turned off,
which is indicated by
disappearing from the standby
screen.
•
•
Even in manner mode, the cell phone still emits a
sound when autofocusing, a shutter sound when you
take a photo.
Changing the Incoming Ring Tone
When the standby screen is displayed, press c.
Use a to select Func/Settings and then press
c (Select).
Use j to select Sound/Vib/Lamp and then
press c (Select).
Use j to select Incoming Setup and then press
c (Select).
Use j to select Incoming Call and then press
c (Select).
Use j to select
(Ringtone) and then press
c (Select).
Use j to select Original and then press
c (Select).
Use j to select a ring tone and then press
c (Set).
The incoming ring tone is set.
If you press & (Play), the tone plays.
Press % (OK).
•
•