Filter
Top Products
GM47/GM48 INTEGRATOR’S MANUAL
116
LZT 123 7263 R1C
3.22 AT+CLAC List all available AT Commands
Causes the ME to return one or more lines of AT commands. This
command has the same functionality as AT*.
Note! This command only returns the AT commands that are available to the
user.
3.23 AT+CMEE Mobile Equipment Error
Disables or enables the use of result code +CME ERROR: <err> as an
indication of an error relating to the functionality of the ME. When
enabled, ME related errors cause +CME ERROR: <err> final result
code instead of the regular ERROR final result code. ERROR is
returned normally when error is related to syntax, invalid parameters, or
TA functionality. For more information, refer to “+CME ERROR
(Mobile Equipment Error Code)”, page 85.
Command Possible Responses
+CLAC <AT Command1> [<CR> <LF> <AT Command2>[…]]
+CME ERROR: <err>
+CLAC=? +CME ERROR: <err>
Description Command Possible Responses
Request GSM Mobile
Equipment Error
Control
AT+CMEE=[<n>] •OK
•ERROR
Show the current
setting
AT+CMEE? • +CMEE: <n>
•OK
•ERROR
Show if the command
is supported
AT+CMEE=? • +CMEE: (list of
supported <n>s)
•OK
•ERROR
<n> Description
0 Disable +CME ERROR: <err> result code and use ERROR
instead. Default value
1 Enable +CME ERROR: <err> result code and use numeric
<err> values (see page 85)
2 Enable +CME ERROR: <err> result code and use verbose
<err> values (see page 85)