Filter
Top Products
GM47/GM48 INTEGRATOR’S MANUAL
202
LZT 123 7263 R1C
12.10 AT+CRES Restore SMS Settings
Restores message service settings from non-volatile memory to active
memory. A TA can contain several profiles of settings. Settings
specified in commands Service Centre Address +CSCA, Set Message
Parameters +CSMP and Select Cell Broadcast Message Types +CSCB
(if implemented) are restored. Certain settings, such as SIM SMS
parameters, cannot be restored.
12.11 AT+ICF Cable Interface Character Format
This extended-format compound parameter is used to determine the
local serial port start-stop (asynchronous) character framing used by the
DCE to accept DTE commands, and while transmitting information text
and result code, if this is not automatically determined; (Not
supported) +IPR=0 forces +ICF=0 (see +IPR).
Description Command Possible Responses
Restore settings AT+CRES[=<profile>] •+CMS ERROR: <err>
•OK
•ERROR
Show if the command
is supported
AT+CRES=? • +CRES: (list of
supported
<profile>s)
•+CMS ERROR: <err>
•OK
•ERROR
<profile> Description
0..2 Profile number where settings are to be stored. Default
value is 0
Description Command Possible Responses
Defines DTE-DCE
character framing
AT+ICF=[format[,parity]] •OK
•ERROR
Show the current
setting
AT+ICF? •+ICF:
<format>,<parity>
•OK
•ERROR
Show if the
command is
supported
AT+ICF=? • +ICF: (list of
supported
<format>s), (list of
supported <parity>s)
•OK
•ERROR
<format> Description
3 8 Data 1 Stop. Default value