Filter
Top Products
GM47/GM48 INTEGRATOR’S MANUAL
254
LZT 123 7263 R1C
Example
AT+CSCA?
+CSCA: “44385016005”,145
OK
15.5 AT+CMGF Message Format
Common for both PDU and Text Modes
This command tells the TA, which input and output format to use for
messages. The <mode> parameter indicates the format of messages
used with send, list, read and write commands, and unsolicited result
codes resulting from received messages. Mode can be either PDU mode
(entire TP data units used) or text mode (headers and body of the
messages given as separate parameters).
Test command returns supported modes as a compound value.
Description Command Possible Responses
Set message format AT+CMGF=<mode> •OK
•ERROR
Show the current
setting
AT+CMGF? •+CMGF: <mode>
•OK
•ERROR
Show if the command
is supported
AT+CMGF=? • +CMGF: (list of
supported
<mode>s)
•OK
•ERROR
<mode> Description
0 PDU mode
1 Text mode