Filter
Top Products
15. SHORT MESSAGE SERVICES - POINT TO POINT
259
LZT 123 7263 R1C
if TE character set other than “HEX” (refer command Select
TE Character Set +CSCS in TS 07.07): ME/TA converts the
entered text into GSM alphabet according to rules of Annex
A; backspace can be used to delete last character and
carriage returns can be used (previously mentioned four
character sequence shall be sent to the TE after every
carriage return entered by the user);
if TE character set is “HEX”: the entered text should consist
of two IRA character long hexadecimal numbers which
ME/TA converts to 7-bit characters of GSM alphabet (e.g.
17 (IRA 49 and 55) will be converted to character Π (GSM
23));
if <dcs> indicates that 8-bit or UCS2 data coding scheme is used
or <fo> indicates that GSM 03.40 TP-User-Data-Header-
Indication is set: the entered text should consist of two IRA
character long hexadecimal numbers which ME/TA converts into
8-bit octet (e.g. two characters 2A (IRA 50 and 65) will be
converted to an octet with integer value 42).
• Sending can be cancelled by giving <ESC> character (IRA 27).
• <ctrl-Z> (IRA 26) must be used to indicate the ending of the
message body.
<da> Description
String type GSM 03.40 TP-Destination-Address Value in string format;
BCD numbers (or GSM default alphabet characters) are
converted to characters of the currently selected TE
character (refer command +CSCS). Type of address given
by <toda>
<toda> Description
String type GSM 04.11 TP-Destination- Address Type-of-Address octet
in integer format (when first character of <da> is +(IRA 43)
default is 145, otherwise default is 129
<mr> Description
String type GSM 03.40 TP-Service-Centre-Time-Stamp in time-string
format (refer <dt>)
<scts> Description
Integer GSM 03.40 TP-Message-Reference